Genelec 8350A
Delivery & payment
- Pickup at the school
- Free · 9:00–21:00
- Ho Chi Minh City
- Fee confirmed with your order
- Across Vietnam
- Courier · fee confirmed by phone
- Payment
- VietQR · cash on delivery · pay at the school
Warranty Genuine product, official warranty, 7-day exchange for factory faults.
- Type
- 2-way Smart Active Monitor (SAM), bi-amplified
- Drivers
- 205 mm (8″) woofer, 25 mm (1″) metal dome tweeter, magnetically shielded
- Amplifier
- 200 W (bass) + 150 W (treble), Class D
- Frequency response
- 33 Hz – 22 kHz (−6 dB); 38 Hz – 20 kHz (±1.5 dB)
- Max SPL
- ≥ 112 dB short-term; ≥ 121 dB peak (pair, 1 m)
- Crossover
- 1.8 kHz
- Inputs/outputs
- XLR analog in (balanced, 10 kΩ); XLR AES/EBU in and thru (16–24 bit, 32–192 kHz)
- Control network
- 2 × RJ45 for GLM
- Calibration
- GLM AutoCal; DIP switches for stand-alone use
- Energy saving
- ISS, < 1 W in standby
- Power
- 100–240 VAC, 50/60 Hz; 230 W at full output
- Dimensions (W × H × D)
- 286 × 452 × 278 mm with Iso-Pod (433 mm high without)
- Weight
- 12.8 kg
- Finishes
- Dark Grey, White, Black
- In the box
- Monitor, 1.8 m mains cable, 5 m RJ45 cable, operating manual
Description
The Genelec 8350A is a two-way Smart Active Monitor with an 8-inch woofer, for studios that need full-range monitoring at higher levels: music production and mixing, post-production and broadcast. As part of Genelec's SAM range it can be measured and tuned to the room with Genelec's GLM software.
Highlights
- 205 mm woofer and 25 mm metal dome tweeter driven by 200 W and 150 W Class D amplifiers.
- 33 Hz – 22 kHz (−6 dB), ±1.5 dB from 38 Hz to 20 kHz, 112 dB short-term SPL.
- Analog XLR input plus AES/EBU digital input and thru (up to 24-bit/192 kHz), chaining up to four monitors.
- GLM network with AutoCal for level, delay and room EQ; settings can be stored in the speaker.
- Rear DIP switches for stand-alone use: Bass Tilt, Treble Tilt, Desktop 160 Hz and Bass Roll-Off.
- Die-cast aluminium MDE cabinet, DCW waveguide, magnetically shielded drivers and an Iso-Pod stand for vertical or horizontal use.
In your setup
Without a computer the 8350A works as a normal active monitor: connect XLR from your interface or console and set the rear switches. Room calibration needs the free GLM software and a GLM kit with adapter and measuring microphone, which is not in the box; the 5 m network cable is. For deeper bass, Genelec recommends its 7300-series subwoofers, such as the 7380A.
In the box
- One Genelec 8350A monitor
- Mains cable, 1.8 m
- RJ45 cable for GLM, 5 m
- Operating manual
