Yamaha DBR10
Delivery & payment
- Pickup at the school
- Free · 9:00–21:00
- Ho Chi Minh City
- Fee confirmed with your order
- Across Vietnam
- Courier · fee confirmed by phone
- Payment
- VietQR · cash on delivery · pay at the school
Warranty Genuine product, official warranty, 7-day exchange for factory faults.
- Type
- 2-way bi-amp powered speaker, bass-reflex
- Power
- 700 W dynamic (LF 500 W, HF 200 W); 325 W continuous (LF 260 W, HF 65 W); Class-D
- Woofer
- 10″ cone, 2″ voice coil, ferrite magnet
- HF driver
- 1″ compression driver (1″ throat), ferrite magnet
- Frequency range (−10 dB)
- 55 Hz – 20 kHz
- Max SPL (1 m, on axis)
- 129 dB SPL
- Coverage
- 90° H × 60° V
- Crossover
- 2.1 kHz, FIR-X tuning (linear-phase FIR filter)
- Inputs
- CH1: XLR/TRS 6.35 mm combo (mic or line); CH2: XLR/TRS 6.35 mm combo + 2 × RCA (line level)
- Output
- 1 × XLR: CH1 thru or CH1+CH2 mix
- Processing
- D-CONTOUR (FOH/MAIN, MONITOR, OFF), HPF switch
- Cabinet
- Black plastic, steel grille, 50° floor-monitor angle, fan cooling (4 speeds)
- Mounting
- 35 mm pole socket; 2 × M8 rigging points (bottom); 1 top handle
- Power consumption
- 18 W idle, 60 W at 1/8 power
- Dimensions (W × H × D)
- 308 × 493 × 289 mm
- Weight
- 10.5 kg
Description
The Yamaha DBR10 is the smallest model in Yamaha's DBR series of powered loudspeakers: a 10″ two-way speaker with a 700 W bi-amp and a simple 2-channel mixer, in a 10.5 kg plastic cabinet with one top handle. Yamaha positions it as a utility speaker – a main speaker for small performances, DJ sets and speeches, or a floor monitor.
Highlights
- 700 W dynamic power (500 W for the woofer, 200 W for the 1″ compression driver) and up to 129 dB SPL at 1 m.
- FIR-X tuning: a linear-phase crossover at 2.1 kHz; frequency range 55 Hz – 20 kHz, coverage 90° × 60°.
- D-CONTOUR processing with FOH/MAIN and MONITOR settings, or off.
- Channel 1 takes a microphone or line signal on a combo jack; channel 2 takes line sources on a combo jack or a pair of RCA jacks.
- 50° wedge angle for floor monitoring, 35 mm pole socket and two M8 points for eyebolts or brackets (sold separately).
In your setup
For a small DJ gig, connect the controller or mixer to the RCA or combo input of channel 2 and the MC's microphone to channel 1 – the speaker mixes both itself. Set the XLR output to MIX to pass both channels on to a second DBR10 or another powered speaker, or to THRU to send channel 1 alone. On a 35 mm pole the DBR10 works as the main speaker; laid on the floor in its wedge position with D-CONTOUR on MONITOR, it serves as a monitor for the DJ booth or the stage. A four-speed fan cools the amplifier.
