Yamaha Stagepas 100

14,900,000 ₫In stock

Delivery & payment

Pickup at the school: Free · 9:00–21:00
Ho Chi Minh City: Fee confirmed with your order
Across Vietnam: Courier · fee confirmed by phone
Payment: VietQR · cash on delivery · pay at the school

Warranty Genuine product, official warranty, 7-day exchange for factory faults.

Warranty policy · Refunds, cancellations and returns

Spec sheetYAMAHA · Stagepas 100

Type: Portable all-in-one PA, coaxial speaker with built-in mixer
Drivers: 6.5″ cone (1.7″ voice coil) + 1″-throat compression driver (1.4″ voice coil)
Amplifier: Class-D, 100 W dynamic (LF 93 W + HF 7 W)
Max SPL: 120 dB SPL peak @ 1 m
Frequency range: 70 Hz – 20 kHz (−10 dB)
Coverage: 90° × 90°
Crossover: 1.8 kHz (FIR-X)
Inputs: Input 1: combo (mic/line); Input 2: combo (mic/line, Hi-Z); Input 3: 3.5 mm stereo mini (line)
Outputs: 1 × XLR (mix of inputs 1–3)
Bluetooth: Ver. 5.0, A2DP (SBC, AAC), Class 1
Processing: 2-band master EQ
Power: 100 – 240 V, 50/60 Hz via AC adaptor (no battery); 30 W rated
Cabinet: Polypropylene; rotatable bottom handle; 3/8″ threaded insert; fanless
Dimensions (W × H × D): 239 × 310 × 215 mm (with handle)
Weight: 5.2 kg (without AC adaptor)
Included accessories: Power cord, AC adaptor (PA-500)

Description

The Yamaha STAGEPAS 100 is a one-box portable PA: a 6.5″ coaxial speaker, a 100 W amplifier and a small mixer in a cabinet you can carry in one hand. It is made for solo performers, small acoustic gigs, speeches and presentations where you want to plug in and start within seconds.

Highlights

Coaxial design: a 6.5″ cone woofer with a 1″-throat compression driver, crossed over at 1.8 kHz with Yamaha FIR-X filters.
Class-D amplifier rated 100 W dynamic (93 W LF + 7 W HF), cooled without a fan.
Up to 120 dB peak SPL at 1 m, a 70 Hz – 20 kHz range (−10 dB) and 90° × 90° coverage.
Three inputs: two combo jacks for mic or line (input 2 switches to Hi-Z for instruments) and a stereo mini-jack line input.
Bluetooth 5.0 (A2DP, SBC/AAC) for backing tracks from a phone, plus a 2-band master EQ on the front panel.
5.2 kg polypropylene cabinet with a rotatable handle and a 3/8″ threaded insert.

In your setup

Connect a vocal mic to input 1, an instrument to the Hi-Z input 2 and a phone or laptop to input 3 or over Bluetooth, then set the volume and master EQ. The XLR output carries the mix of inputs 1–3, so you can pass it to a second powered speaker or a mixer. This model runs on mains power through the supplied PA-500 adaptor; Yamaha also makes the STAGEPAS 100BTR mkII with a built-in battery and USB-C audio, which is a separate product.